![]() I almost forgot, which one is newer? the one from here or the one at. does any of you knows how to enable its expansion rom? so I can boot using the card instead of the mobo?. it works really well now, only two things, first I can't seem to stop the DVD-RW drive from resetting every once in a while, it kindda anoyis me it waking up every 10 minutes or so, and also. Working great! very neat of you to deliver this driver, I was hopeless 2 years ago when I bought two adapters bearing this chipset, I thought they would work out-of-the-box but they didn't, now I've got one working on my A780GM-A, I'm using it because I can only work with sata on the mobo, not ide, I get random KP and I realized it was due to the IDE channels being enabled and also I was using AppleATIPATA for it to work, after a while I thought it might have also been the bus master option enabled on BIOS but oh well. Status: D0 PME-Enable- DSel=0 DScale=0 PME. Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- have to shutdown and power on again to reboot. In the case, even hardware reset does not work. ![]() I never tested more than 1 drives per port.Īs it seems that the BIOS does not initialize hardware completely, reboot may not work if your boot drive is connected to the secondary channel. ( it should be easy to modify the project file to build 10.5 kext )Äon't connect master/slave drives. ( The code is based on AppleVIAATA and NetBSD drivers )Ä¡0.6 only. With the SiI 3132, Silicon Image provides customers with drivers for the Windows and Linux. I wrote a kext supporting some inexpensive PCI IDE/SATA chips. SII3132 PCI Express to 2-port Serial ATA II Host Controller.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |